Sinumerik 810D/840D

Sinumerik 810D/840D

The Sinumerik 810D/840D is part of the changeable control WinNC. WinNC allows the user to learn all CNC industry controls that are common on the market, on a single machine. One of these controls is the 810D/840D. It corresponds in handling and function the particular original control and it can be used on a commercial PC. The user has the possibility to work on the PC as well as on the machinecontrol and gets familiar with all aspects of control programming in detail.

Highlights

  • Operation like the industrial control Sinumerik 810 D & 840 D MMC 100.2 with horizontal and vertical softkeys (cycle version 6.xx)
  • 2D Graphic simulation with autozoom
  • Detailed error message about drive problems and programming faults
  • Operation via PC keyboard, digitizer, control keyboard or mouse
  • Languages: German, English, French, Spanish, Italian, Swedish, Russian, Chinese, Czech, Dutch, Hungarian
  • Main programs, sub programs tool data register and workpiece management will be stored permanently
  • Position offset will be stored by pressing the store button
  • Program titles can be given without specifications
  • Window oriented, modern user interface
  • Comprehensive editor with intermediate memory storage function
  • Large memory of NC programs (limited only by the size of the hard disc)

Functions

Data in/output of workpiece program files:
Workpiece program files can include several main and subprograms and further corresponding tool data. Moreover, workpiece data, R-parameter and zero offsets can be exported and imported.
Contour processor with graphic simulation:
The contours the workpieces should have after the machining process are illustrated by graphics in the programming process. 
Editor:
In order to ease the operation and the programming the control is equipped with an editor with helping cycles and pictures.
Preliminary block run:
Already finalized NC codes can be skipped.
Intermediate memory storage:
Data that are stored in the intermediate memory storage can be renewed in the programming process.
Setting data:
JOG feed and speed limitations can be entered.
Dry run:
In the run-up to the machining process collisions and programming mistakes can be avoided and corrected by using the dry run.
Automatic measuring of position offsets:
When scratching the measured workpiece the position offsets will be taken over.
Automatic measuring of tools:
When scratching the reference workpiece the workpieces offsets will be taken over.
Diagnostics:
Alarms, signals, versions and customer information are displayed by the diagnostics.

Downloads

 

Software-Demos

Our demo versions contain the full function range, but they are limited to 30 days (from date of installation). You can convert the demo version into a full version by using the license manager and entering the activation code.

Title Version Filesize
DEMO 21.14.0007 39.06 MB
 

Updates/Upgrades

Get up to date. The only requirement is that you have a valid license key. The improvements concerning the update are documented in History.

You are reminded that, in case of an update, all WinNC-components  (WinNC-controls, 3DView, DNC, Robotic, CAMConcept,...) located in the regarding directory must be updated to the current release-version.

Title Version Filesize
UPDATE 21.14.0007 39.06 MB
short description für update installation 415.01 KB
ACC update 3.02.0001 20.37 MB
MSD/PLC 2016.07.15 993.78 KB
Remove SPOX 2006.12.05 1.92 MB
AC95_ACC 2013.10.15 3.12 MB
AC88_ACC 2013.10.15 3.11 MB
ACpn Update 1.10.0006 191.26 MB
 

Instructions/Manuals

Here you will find all the information and instructions for installation and application of the control surface

Title Version Filesize
control manual milling G2007-06 3.32 MB
control manual turning G2007-06 2.84 MB
startup milling and turning K2016-05 1.13 MB
 
Get Acrobat Reader web logo Get Adobe Reader

More downloads

Title Version Filesize
Digitizer-Overlay Mill 80.41 KB
Digitizer-Overlay Turn 80.82 KB
 

Versionhistory

Version

     

Date

     

Changes

21.1419.12.2014Adaption ACpn-machines, Easy2control
21.1211.03.2013Compatibility 'WinNC for Sinumerik Operate', Windows8
21.1015.05.2012Compatibility 'WinNC for Sinumerik Operate'
21.0825.09.2009Integration CM250
21.0623.06.2008Integration CM450
21.0230.10.2007Czech version added, Enhancements for CT250,
WinConfig replaced by EMConfig
21.0019.03.2007Vista-ready, UNICODE, industrial strength tool-path-compensation
20.0207.02.2006Recognition of approach- and departure-moves out of CAD/CAM systems
20.0001.12.2005Major improvements at toolpathcorrection, cycle-execution (cycle95), manipulation of coordinate systems and position display unit.
16.6003.06.2005tool-administration for 3D-View, Cycle-version 6.02,
hungarian version
16.1022.11.2004Rectification in R-parameter-programming,
increase in performance with 3D-view and programmable zero offset
16.0325.05.2004Update
16.0005.05.2004new 3D-View, new license-system

Licenses

Licenses
Single license
Multiple license: External programmer work place for any CNC machine tool
Multiple license
Multiple license: For external NC programming of NC controlled machine tools. It may be installed within an institute registered by the licenser in an unlimited number on PC workstations respectively in a network.
Machine license
Machine license: Control software for all EMCO Concept machines
School license
School license: Temporary multiple license

Options/Accessories

EMCO Win3D-View

EMCO Win3D-View

Win3D-View is a 3D simulation for turning and milling and is available as an option in addition to the WinNC Control. Graphic simulations of CNC controls are designed especially for industrial experience. Win3D-View displays exceed industry standards. Tools, blanks, clamping devices, and work processes are highly realistic. The system checks the programmed travel of the tool to prevent collision with clamping devices and blanks. For further information click here.

Concept machines

Concept machines

Whether for small businesses or for professional CNC training the Concept machines can be applied flexibly. With its modular concept the machine series can be used in a productional CIM network as well as for training purposes equipped with training softwares and coursewares. For more information about the Concept machines click "machines" in the main menu.

Basic keyboard

Basic keyboard

An external keyboard supports practical programming on an external programmer work place.

Control specific keyboard - key module

Control specific keyboard - key module

In addition to the interchangeable control all Concept machines can be equipped with, there's the possibility to get the control specific keyboard. By using the control keyboard (accessory with interchangeable key modules for the respective control type) the operation becomes easier and has a higher didactic value by its similarity to the original control.

TFT-Display

TFT-Display

Display 

Easy2control

Easy2control

“Easy2control” adds a range of attractive applications to the successful interchangeable control system used in EMCO training machines. Suitable for use in machines and simulation workplaces alike, it displays additional control elements directly on the screen and, when used together with a touchscreen monitor, provides the ideal input interface. With support for a wide range of keyboard variants, customer-specific screen layouts and tailored solutions for individual customers, Easy2control represents a promising and highly flexible extension to the modular EMCO training concept.
The interchangeable controls are represented using an on-screen keyboard, which makes switching between different control systems even easier and quicker.

EMCO CAMConcept

EMCO CAMConcept

CAMConcept is innovative software for complete CAD/CAM and CNC training, from design to manufacture.CAMConcept incorporates both the functions of a professional CAD/CAM system and the advantages of a special training program. All core CAD program functions are available. Graphic displays of CNC cycles allow quick programming, while simulations and collision checks ensure that control programming is safe. For more information, click here.

Robotic

Robotic

The Robotic-Interface is used for connecting a concept-machine to a FMS-/CIM-system. The main-functions of a concept-machine can be automated via inputs and outputs of an optional hardware-module.

DNC

DNC

The DNC-Interface (Distributed Numerical Control) allowes a remote control of the control software (WinNC) via a software-protocol.The DNC interface creates a connection between a superordinate computer (production master computer, FMS-computer, DNC-host computer etc.) and the control computer of an NC machine. After activation of the DNC operation the DNC computer (Master) takes over the control of the NC machine (Client). The entire production control is completely assumed by the DNC computer. The automation devices such as doors, clamping chuck (collet), sleeve, coolant etc. can be controlled by the DNC computer. The actual status of the NC machine is displayed on the DNC computer.