Highlights
Overall dimensions/Work space
Installation plan HT 65 1300 TRIPLE TURN / DUOTURN
Installation plan HT 65 1300 TRIPLE TURN / DUOTURNWorkpieces
Versions
Hyperturn 65-TT SM3Y
Hyperturn 65-TT SM3Y with three tool turrets, driven tool and 1 x Y-axis
Hyperturn 65-TT SM3Y2
Hyperturn 65-TT SM3Y2 with three tool turrets, driven tool and 2 x Y-axes
Hyperturn 65-TT SM3Y3
Hyperturn 65-TT SM3Y3 with three tool turrets, driven tool and 3 x Y-axes
Hyperturn 65-DT SM2Y
Hyperturn 65-DT with two tool turrets, driven tool and one Y-axis (for both Hyperturn 65 DT-1000 and -1300)
Hyperturn 65 DT SM2Y2
Hyperturn 65 DT SM2Y2 with two tool turrets, driven tool and 2 Y-axes (for both Hyperturn 65 DT-1000 and -1300)Options/Accessories
Rotating window Rotoclear S3
Rotating window glued to the inside of the safety glass. The rotating disc throws off coolant and chips. Leaving a clear view of the setup and the machining process
Tail stock
For shaft-type application, the HYPERTURN 65 offers two tailstockversions. On the one hand an universal, hydraulic movable tailstock for manually loaded machines and on the other hand an NC-tailstock for fully automatic loaded
machines. With the advantage of very short idle times.
BMT-turret
For economical production of complex turned/milled parts withmainly milling share, there is optional the BMT-turret with water cooled direct drive.
With max. 12000 rpm, 30 Nm and 10 kW, this turret offers optimal prerequisites
for the complete machining.
Turret-steady-rest / Live-center
Live-center / turret-steady-rest. For complete machining of shaft work on the one hand in the main spindle and on the other hand in the sub-spindle, there are a live center and if needed also a turret steady rest available. So that long, slim workpieces can be manufactured precise and without chatter marks.
Automation
Turn / Mill Assist
Compact standard automation for small and medium-sized batches for turning and milling machines.
Reduction of working hours by up to 70%
Compact and space-saving solution
Graphically supported operation
Free access to the machine door
For small and medium-sized series
Very short configuration and setup times
No special knowledge about robots required
On-site installation and training
Short-bar loader EMCO SL 1200
The EMCO short-bar loader SL 1200 is the perfect solution for the automatic reloading of pre-cut bars up to 1200 mm.
The adavantage: small footprint and short loading times through shorter strokes.
The control unit is perfectly adapted to the interface of the machine.
Software/Control
EMCONNECT - Digital Process Assistant
Esprit (optional)
EMCO CPS Pilot (optional)
