Overall dimensions/Work space
Workpieces
Examples of use
Versions
Maxxturn 110 x 1500/2500 or 3500 (Siemens)
without driven tools; variously with wide angle 1500/2500 or 3500 mm
Maxxturn 110 x 1500 or 2500 (Fanuc)
without driven tools; alternatively with wide angle 1500 or 2500 mm
Maxxturn 110 M x 1500 or 2500 (Fanuc)
with driven tools and C axis; variously with wide angle 1500 or 2500 mm
Maxxturn 110 MY x 1500/2500 or 3500 (Siemens)
with driven tools, C axis and Y axis; variously with wide angle 1500/2500 or 3500 mm
Maxxturn 110 MY x 1500 or 2500 (Fanuc)
with driven tools, C axis and Y axis; variously with wide angle 1500 or 2500 mmOptions/Accessories
With a radio measuring probe on the turret, certain features on the workpiece can still be measured and precisely reworked during the process. Extensive measuring cycles facilitate the application.
Steady rest
Various choices: Single or double steady rest in different sizes with towing system or NC drive.
EMCO tool break monitoring
The tool status is monitored by evaluating the load on the various axis drive motors. Excessive loads point to wear or broken tools. Too low load indicates a tool is missing.
Band filter with high-pressure coolant pumps
A coolant pressure of 25/40/60 or 80 bar can be set as needed. This enables cooland-fed drilling and milling tools to be used to their best advantage.
BMT Revolver für Hyperturn 100, 110, 95, Maxxturn 110,
For economical production of complex turned/milled parts with mainly milling share, there is optional the BMT-turret with water cooled direct drive. With max. 6000 rpm, 45/62 Nm* and 15/22 kW*, this turret offers optimal prerequisites for high milling / drilling performance and stability(*S1/S6-50%).
Software/Control
EMCONNECT - Digital Process Assistant
Esprit (optional)
