|Ход осей X/Y/Z||780 (+760/-20) // 420 // 1500 / 2200 / 3100mm|
|макс. диаметр точения||720 mm (with Milling spindle)|
|диаметр обработки над станиной||800 mm|
|Скорость быстрого хода осей X/Y/Z||30 / 40 / 20 m/min|
|Сила подачи в осях X/Y/Z||1640 / 1640 / 1640 N|
|Макс. скорость оборотов||3500 // 2500 rpm|
|торец шппинделя||A2-8" // A2-11"|
|Макс. мощность привода||33 / 53 kW|
|Макс. крутящий момент||800 // 4400 Nm|
|Количество гнезд для инструмента||40 / 100|
|Макс. диаметр инструмента||90 mm|
|Габаритные размеры (ДхШхВ)||8100 / 8800 / 9600 x 3200 x 3000 mm|
|Вес станка||25000 – 35000 kg|
The spacious work area has been designed for workpieces featuring a turning diameter of up to 750 mm. The complete machining of complex workpieces in one setup is possible when using an NC steady rest and a counter-spindle.
Featuring performance data that enable all types of machining without any compromises. The Emco spindle concept comes with two servomotors that also act as a C-axis. The motors work synchronously, guarantee the compensation of plays and enable the achievement of the outputs and torques shown in the diagram. What is more, the main spindle and the counter-spindle are equipped with a special EMCO cooling system that optimises the temperature stability and guarantees maximum precision regardless of the machining duration.
The standard version comes with 12000 rpm and is suitable for all turning, drilling and milling operations and technologies. The water-cooled ISM (integrated spindle motor) can be delivered with up to 33,8 kW and a maximum torque of 165 Nm as well as with HSK-T 63 or PSC63 (Capto C6). Coolant inside and outside (up to 80 bar), which allows for the efficient production of turned and milled parts.
The maintenance center is located at the rear left of the machine. The pneumatic unit is located here. Clamping pressures can now be programmed and defined in the part program.
Tool disk is integrated. The tools are driven directly. Without gear train. Without gear wheels. Without vibrations and almost noiseless.
Work Area 1
The tool probe in the workspace enables fast and precise measurement of the tools both in the milling spindle and on the turret in the workspace.
Measuring probe with various receptacles for automatic measurement of workpieces in the working area with subsequent tool correction. With measuring set for checking and correcting the kinematic accuracy of 5-axis machining.
Different hydraulic steady rests are available for shaft machining. Small shaft parts can be supported with a turret steady rest up to 180mm. For large shaft parts, a CNC steady rest with centering ranges up to 520 mm is available.
The Sinumerik ONE is the universal and flexible CNC system. With a wide range of functionality, it is suitable for use in almost all technologies. The Sinumerik ONE sets standards in terms of dynamics, precision and integrability in networks.
With the Sinumerik ONE you rely on:
Sinumerik & EMCONNECT, the digital process assistant
EMCONNECT is included in the standard machine. Switching between emcoNNECT apps and the control system is possible with a single click. All production-relevant data can be displayed in full-screen or sidebar view.
The new SINUMERIK ONE has been specially developed for smart manufacturing.
This means that the SINUMERIK ONE can be seamlessly integrated into digital solutions and workflows.
For increased productivity and efficiency in production.
EMCONNECT facilitates easy access to digital production – all important information and systems are accessed centrally on the machine. The familiar NC control and hence the familiar operation of the machine remain unchanged.
A clear and compact overview of the machine state, the machine data and the operating mode is available at a glance thanks to the emcoNNECT Dashboard. The hardware basis of the EMCONNECT control centre is a 22“ multi-touch display teamed with an industrial PC and a keyboard including HMI hotkeys for easy and intuitive operation via a user interface optimised for touchscreen use.
Included as standard equipment in the Siemens machine version (Sinumerik ONE).
The sensational CAM solution for turning and turning/milling. ESPRIT greatly simplifies the programming of complex machining processes and significantly reduces set-up times.
Using CPS the result is 100 % production reliability, up to 80 % shorter set-up times and an enormous increase in productivity and operating efficiency.