Technical data
Work area
| Travel in X/Y/Z | 220/-/900 mm |
| Spindle bore hole | 53/50 mm |
| Distance between centers | 1000 mm |
| Distance above centers | 200 mm |
| Rapid motion speeds in X/Y/Z | 10 m/min |
| Feed force in X/Y/Z | 4 kN |
Main spindle
| Max. speed | 4000 rpm |
| Spindle nose | Size 5; DIN 55029 |
| Max. drive power | 7.5 / 10 kW |
| Max. torque | 108 Nm |
Tailstock
| Quill diameter | 50 mm |
| Quill travel | 120 mm |
| Inner quill taper | MT3 |
General data
| Dimensions (LxWxH) | 2320 x 1730 x 1700 mm |
| Machine weight | 1500 kg |
Highlights
Work area
During machining in automatic mode the work area is closed by two slideable chip protection doors. When using the manual mode machining with opened doors is possible.
Optional equipment
EMCOMAT E-200 MC can be fitted with various chucks and tool holder systems.
Overall dimensions/Work space
Workpieces
Examples of use
Options/Accessories
Steady rest
For a precise machining of even long workpieces, various steady rests are available, additionally to the tailstock.
Fast-change tool holder
To speed up the machining process, there are several tool holding systems available. This ensures that tools can be changed quickly.
Live center
For precise machining of even long workpieces, the tailstock can be additionally equipped with an extended live center.
Lathe chuck
High precision 3-jaw lathe chuck incl. 1 set of out- and inside top jaws, for direct mounting according to CAMLOCK DIN55029.
Sliding machine door
The sliding machine door allows for protection against chips and optimal accessibility to the work area at the same time.
Software/Control
