FAGOR 8055



Find EMCO nearby

FAGOR 8055

FAGOR 8055

The Fagor 8055 is part of the interchangeable control WinNC.

WinNC allows the user to learn all CNC industry controls that are common on the market on a Concept machine or on a programmers place.

One of these controls is the Fagor 8055.

It corresponds in terms of handling and function to the particular original control and it can be used on a commercial PC.

The user has the possibility to work on the PC as well as on the machinecontrol and gets familiar with all aspects of control programming in detail.

Highlights

  • Handling like the Fagor 8055 industry control with horizontal softkeys
  • Detailed error messages about drive problems and programming faults
  • Operation via PC keyboard, control keyboard and mouse
  • Languages: German, English, French, Spanish
  • Programs and tool data will be stored permanently
  • Position offset will be stored permanently
  • Large NC program memory (limited only by the size of the hard disc)
  • Reproduced software version 08.11 for TURN and 07.11 for MILL

Functions

Automatic measuring of tools

When scratching the reference workpiece the workpieces offsets will be taken over.

Automatic measuring of position offsets

When scratching the measured workpiece the position offsets will be taken over.

Dry run

In the run-up to the machining process collisions and programming mistakes can be avoided and corrected by using the dry run.

Preliminary block run

Already finalized NC codes can be skipped.

Editor

In order to ease the operation and the programming the control is equipped with an editor with helping cycles and pictures.

Contour processor with graphic simulation

The contours the workpieces should have after the machining process are illustrated by graphics in the programming process.

Diagnostics

Alarms, signals, versions and customer information are displayed by the diagnostics.

Downloads

 

Software-Demos

Our demo versions contain the full function range, but they are limited to 30 days (from date of installation). You can convert the demo version into a full version by using the license manager and entering the activation code.

Title Version Filesize
DEMO 1.34.0004 92.84 MB

Updates/Upgrades

Get up to date. The only requirement is that you have a valid license key. The improvements concerning the update are documented in History.

You are reminded that, in case of an update, all WinNC-components  (WinNC-controls, 3DView, DNC, Robotic, CAMConcept,...) located in the regarding directory must be updated to the current release-version.

Title Version Filesize
UPDATE 1.34.0004 92.84 MB
short description für update installation 415.01 KB
ACC update 3.02.0003 30.39 MB
MSD/PLC 2019.01.23 736.81 KB
Remove SPOX 2006.12.05 1.92 MB
AC95_ACC 2013.10.15 3.12 MB
ACpn Update 1.10.0008 192.62 MB

Brochures

Title Version Filesize
Brochure EMCO Software 620.00 KB

Instructions/Manuals

Title Version Filesize
control manual milling A2005-03 2.93 MB
control manual turning A2004-10 3.94 MB
startup milling and turning K2016-05 989.40 KB

More downloads

Title Version Filesize
Digitizer-Overlay Mill 98.00 KB

Versionhistory

Version

     

Date

     

Changes

1.342   23.01.2019   Compatibility WinNC for Heidenhain TNC 640
1.32   30.05.2017   Compatibility WinNC for Heidenhain TNC 640
    14.09.2015   Release for Windows 10
1.30   19.12.2014   Adaption ACpn-machines, Easy2control
1.28   11.03.2013   Compatibility 'WinNC for Sinumerik Operate' / Windows8
1.26   15.05.2012   Compatibility 'WinNC for Sinumerik Operate'
1.24   25.09.2009   Integration CM250
1.22   23.06.2008   Integration CM450
1.20   30.10.2007   Vista-ready,
Enhancements for 3DView
Enhancements for CT250, 
WinConfig replaced by EMConfig
1.18   03.06.2005   tool-administration for 3D-View, Profile milling 4th axis
1.16   24.01.2005   Error-correction contourturning XC,ZC Fagor Mill
1.13   02.11.2004   Update
1.11   01.10.2004   Market launch

Licenses

Single license

External programmer work place for any CNC machine tool

Multiple license

For external NC programming of NC controlled machine tools. It may be installed within an institute registered by the licenser in an unlimited number on PC workstations respectively in a network.

Machine license

Control software for all EMCO Concept machines

School license

Temporary multiple license

Options/Accessories

EMCO Win3D-View

Win3D-View ist eine 3-D-Simulation für Drehen und Fräsen, die als Option zusätzlich zum Produkt EMCO WinNC angeboten wird. Die Bildschirmdarstellung bei Win3D-View geht über den industriellen Standard hinaus. Realitätsnah werden Werkzeuge, Rohteil, Spannmittel und die Bearbeitungsfolge dargestellt. Die programmierten Verfahrwege des Werkzeuges werden vom System auf eine Kollision mit Spannmitteln und Rohteil überprüft.

Concept machines

Whether for small businesses or for professional CNC training the Concept machines can be applied flexibly. With its modular concept the machine series can be used in a productional CIM network as well as for training purposes equipped with training softwares and coursewares. 

For more information about the Concept machines click "machines" in the main menu.

Basic keyboard

An external keyboard supports practical programming on an external programmer work place.

Control specific keyboard - key module

In addition to the interchangeable control all Concept machines can be equipped with, there's the possibility to get the control specific keyboard. By using the control keyboard (accessory with interchangeable key modules for the respective control type) the operation becomes easier and has a higher didactic value by its similarity to the original control.

TFT-Display

Display 

Easy2control

“Easy2control” adds a range of attractive applications to the successful interchangeable control system used in EMCO training machines.

Suitable for use in machines and simulation workplaces alike, it displays additional control elements directly on the screen and, when used together with a touchscreen monitor, provides the ideal input interface.

With support for a wide range of keyboard variants, customer-specific screen layouts and tailored solutions for individual customers, Easy2control represents a promising and highly flexible extension to the modular EMCO training concept.

The interchangeable controls are represented using an on-screen keyboard, which makes switching between different control systems even easier and quicker.

EMCO CAMConcept

CAMConcept is innovative software for complete CAD/CAM and CNC training, from design to manufacture.

CAMConcept incorporates both the functions of a professional CAD/CAM system and the advantages of a special training program. All core CAD program functions are available. Graphic displays of CNC cycles allow quick programming, while simulations and collision checks ensure that control programming is safe.

For more information, click here.