Technical data
Work area
| Travel in X/Y/Z | 210 / +/-40 / 610 mm |
| Bar diameter | ø 65 mm |
| Max. turning diameter | ø 500 mm |
| Swing over bed | ø 610 mm |
| Distance between centers | 682 mm |
| Rapid motion speeds in X/Y/Z | 30/15/30 m/min |
Main spindle
| Max. speed | 5000 rpm |
| Spindle nose | A2-6 |
| Max. drive power | 22 kW |
| Max. torque | 305 Nm |
Counter spindle
| Max. speed | 5000 rpm |
| Spindle nose | A2-6 |
| Max. drive power | 16,5 kW |
| Max. torque | 125 Nm |
Tailstock
| Automatic tailstock | yes |
| Inner cone | MT4 |
| Travel (automatic) | 500 mm |
Tool turret
| VDI size | 30 (40) |
| Number of tools | 12 |
| Driven tools | 12 |
| Max. speed | 5000 rpm |
| Max. drive power | 6,7 kW |
| Max. torque | 25 Nm |
General data
| Dimensions (LxWxH) | 3480 x 2080 x 2060 mm |
| Machine weight | 6500 kg |
Highlights
Overall dimensions/Work space
Work area EMCOTURN E65 with tailstock (VDI30)
Work area EMCOTURN E65 with tailstock (VDI30)
Work area EMCOTURN E65S with Counter Spindle (VDI30)
Work area EMCOTURN E65S with Counter Spindle (VDI30)
Workpieces
Examples of use
Versions
Emcoturn E65 M - SIEMENS / FANUC / HEIDENHAIN
incl. driven tools, C-axis, Y-axis and tailstock.
Emcoturn E65 MY - SIEMENS / FANUC / HEIDENHAIN
incl. driven tools, C-axis, Y-axis and tailstock.
Emcoturn E65 SM - SIEMENS / FANUC / HEIDENHAIN
incl. counter spindle, driven tools and C-axis.
Emcoturn E65 SMY - SIEMENS / FANUC / HEIDENHAIN
incl. counter spindle, driven tools, C-axis and Y-axis.
Options/Accessories
Band filter with high-pressure coolant pumps
A coolant pressure of 25/40/60 or 80 bar can be set as needed. This enables coolant-fed drilling and milling tools to be used to their best advantage.
Chip conveyer
Chain feeding system with a dump-height of 1200 mm, suitable for: long steel shavings, snarl and wool chips for dry and wet machining.
Tool measurement
The tool measurement sensor mounted in the work area of the EMCOTURN makes it possible to measure tools in the machine. It can be swiveled in and out automatically.
Automation
Turn / Mill Assist
Compact standard automation for small and medium-sized batches for turning and milling machines.
Reduction of working hours by up to 70%
Compact and space-saving solution
Graphically supported operation
Free access to the machine door
For small and medium-sized series
Very short configuration and setup times
No special knowledge about robots required
On-site installation and training
Show details Hide details
Short-bar loader EMCO SL 1200
The EMCO short-bar loader SL 1200 is the perfect solution for the automatic reloading of pre-cut bars up to 1200 mm.
The adavantage: small footprint and short loading times through shorter strokes.
The control unit is perfectly adapted to the interface of the machine.
Show details Hide detailsSoftware/Control
Sinumerik 828D - inkl. ShopTurn
Heidenhain CNC Pilot 640
