Workpiece program files can include several main and subprograms and further corresponding tool data. Moreover, workpiece data, R-parameter and zero offsets can be exported and imported.
When scratching the reference workpiece the workpieces offsets will be taken over.
In the run-up to the machining process collisions and programming mistakes can be avoided and corrected by using the dry run.
Alarms, signals, versions and customer information are displayed by the diagnostics.
Title | Version | Filesize |
---|---|---|
Brochure EMCO Software | 620.00 KB |
Title | Version | Filesize |
---|---|---|
control manual milling | I2003-07 | 1.26 MB |
control manual turning | H2003-07 | 1.31 MB |
startup milling and turning | K2016-05 | 989.40 KB |
Title | Version | Filesize |
---|---|---|
Digitizer-Overlay Mill | 36.26 KB | |
Digitizer-Overlay Turn | 35.51 KB |
Version |
|
Date |
|
Changes |
---|---|---|---|---|
14.28 | 19.12.2014 | Launch behaviour improved | ||
14.26 | 11.03.2013 | Compatibility 'WinNC for Sinumerik Operate' / Windows8 | ||
14.22 | 25.09.2009 | Integration CM250 | ||
14.20 | 23.06.2008 | Integration CM450 | ||
14.18 | 30.10.2007 | Vista-ready, Enhancements for CT250, WinConfig replaced by EMConfig |
||
14.14 | 01.12.2005 | Adaptions WinConfig | ||
14.12 | 03.06.2005 | tool-administration for 3D-View | ||
14.02 | 17.12.2004 | Bugfixes for 3DView and tapping with compensation-chuck (PC-Turn 345-2) |
||
14.00 | 14.10.2004 | new 3D-View, new license-system |
For external NC programming of NC controlled machine tools. It may be installed within an institute registered by the licenser in an unlimited number on PC workstations respectively in a network.