The programmed travels of the tool are tested for collisions (even with motion speed or with standing spindle) with clamping devices or with the raw part by the system. In case of danger an alarm is set.
The entire work area incl. chuck, tailstock and vice as well as tools, raw parts, clamping devices and the machining process are displayed highly realistic.
Tools that are suitable for the machining of workpieces can be looked up and selected in the tool library.
Our demo versions contain the full function range, but they are limited to 30 days (from date of installation). You can convert the demo version into a full version by using the license manager and entering the activation code.
Title | Version | Filesize |
---|---|---|
DEMO | 14.46.0001 | 34.05 MB |
Get up to date. The only requirement is that you have a valid license key. The improvements concerning the update are documented in History.
You are reminded that, in case of an update, all WinNC-components (WinNC-controls, 3DView, DNC, Robotic, CAMConcept,...) located in the regarding directory must be updated to the current release-version.
Title | Version | Filesize |
---|---|---|
UPDATE | 14.46.0001 | 34.05 MB |
short description für update installation | 415.01 KB | |
MSD/PLC | 2020.07.29 | 737.96 KB |
Title | Version | Filesize |
---|---|---|
3DView manual milling | C2007-02 | 1.35 MB |
3DView manual turning | C2007-02 | 1012.48 KB |
Version |
|
Date |
|
Changes |
---|---|---|---|---|
14.46 | 02.04.2020 | Support for swiveling table | ||
14.44 | 23.01.2019 | Support 4th axis at WinNC for Sinumerik Operate and Heidenhain TNC 640 | ||
14.42 | 30.05.2017 | Compatibility WinNC for Heidenhain TNC 640 | ||
14.09.2015 | Release for Windows 10 | |||
14.40 | 19.12.2014 | Enhencements for 'WinNC for Fanuc31i' | ||
14.38 | 23.05.2014 | Minor corrections | ||
14.36 | 11.03.2013 | Compatibility Windows 8 | ||
14.34 | 15.05.2012 | Compatibility 'WinNC for Sinumerik Operate' | ||
14.32 | 25.09.2009 | Intergration CM250 | ||
14.30 | 19.05.2009 | Enhancements for EASY CYCLE | ||
14.28 | 02.12.2008 | Problem with empty tooltable at 3dView-start solved | ||
14.26 | 23.06.2008 | Integration CM450 | ||
14.22 | 30.10.2007 | Simulation can be continued after collision-detection | ||
14.20 | 19.04.2007 | Improvements Tooldata | ||
14.18 | 04.04.2007 | Improvements clamping device | ||
14.16 | 19.03.2007 | VISTA, UNICODE, machine vises | ||
14.10 | 22.02.2006 | Improved representation of the clamping device for milling-machines | ||
14.08 | 01.12.2005 | Improvement of taping | ||
14.06 | 14.06.2005 | Enhancements for taping | ||
14.04 | 03.06.2005 | Tool-Generator | ||
14.00 | 05.05.2004 | Transmit, Tracyl and 4th axis |